Starfleet Scout
Michael Adam Class - NCC-5002B 
Illustrator: Eric Kristiansen
Copyright: 1995
Summary:
GENERAL NOTES:
1. These plans are for the familiarization purposes only and should not be confused with detailed working drawings of the Michael Adam Class Scout.
2. In an emergency, the primary hull can separatefrom the warp nacelle. The warp nacelle cannot operate independently.
3. The auxiliary fusion reactors can provide life-support and sublight propulsion in the event of a hull separation. Normally they provide supplementary power.
4. Hydrogen and other interstellar gases are collected and processedfor use as fuel in the auxillary power systems and impulse engines.
5. Except when berthed, the craft is crewed at all times. The ship's compliment is divided into four watches of six hours.
6. All decks have built in gravity, inertial dampening and anti-radiation forcefields.
7. Environmental suits are fully adjustable and stored in various strategic locations throughout the vessel.
8. The Michael Adam class can accept multiple hull violations. All doors and bulkheads are airtight and capable of withstanding sudden drastic pressure changes. The containment doors seal off sections of the ship to prevent progressive decompression. They are kept open during normal operations, but will close when all stations have been secured or when the hull has been breached. Doors adjacent to evacuated sections can only be overridden by damage control parties. There are similar containment hatches which can seal off all gangways.
9. AUTHORS NOTE: This set of drawings are based on the Joshua Class Command Cruiser designed by Shane Johnson. These modifications to the Command Cruiser are made with his approval.
Comments
Jackill Data Sheets
 |
 |
 |