Starfleet Explorer Class
Reconnaissance Cruiser 
Illustrator: Eric Kristiansen
Copyright: 1995
Summary:
GENERAL NOTES:
1. These plans are for the familiarization purposes only and should not be confused with detailed working drawings of the Explorer Class Reconnaissance Cruiser.
2. In an emergency, the primary hull can separate from the warp nacelle. The warp nacelle cannot operate independently.
3. The auxiliary fusion reactors can provide life-support and sublight propulsion in the event of a hull separation. Normally they provide supplementary power.
4. Hydrogen and other interstellar gases are collected and processed for use as fuel in the auxillary power systems and impulse engines.
5. Except when berthed, the craft is crewed at all times. The ship's compliment is divided into four watches of six hours.
6. All decks have built in gravity, inertial dampening and anti-radiation force fields.
7. Environmental suits are fully adjustable and stored in various strategic locations throughout the vessel.
8. The Explorer Class Reconnaissance Cruiser can accept multiple hull violations. All doors and bulkheads are airtight and capable of withstanding sudden drastic pressure changes. The containment doors seal off sections oj the ship to prevent progressive iiecompression. They are kept open during normal operations, but will close when all stations have been secured or when the hull has been breached. Doors adjacent to evacuated sections can only be overridden by damage control parties. There are similar containment hatcnes which can seal off all gangways.
9. AUTHORS NOTE: This set of drawings are based on the Explorer Class Reconnaissance Cruiser designed by Scott W. Bell, The use of his design is with his approval.
Comments
Jackill Data Sheets
 |
 |
 |