Auto-Range DVM  (220-0174)      Features                Faxback Doc. # 8668

This Micronta True RMS Multimeter is a portable, 32/3-digit meter ideal for
field, lab, shop, bench, and home use.  The meter uses the latest IC and 
display technology to achieve the lowest possible component count, and the
true RMS converter is built into a single multimeter chip.  These features
make the meter rugged and easy to use and ensure reliability, accuracy, and
stability.  Your meter also includes the following features:

LCD BAR Graph Display-makes nulls, peaks, and trends more
apparent.

Transistor-Check Function-measures the gain (hfe) of small-signal, bipolar
transistors and identifies pin-out and type.

Fully Auto-Ranging-makes your meter easier and safer to use by letting you
concentrate on the probes, and also lets you manually set the range for 
situations where you know what values to expect.

Volts or dBm Voltage Display-lets you select the unit of measure that 
suits your application.

Data-Hold Function-freezes the display so you view the reading even after
you disconnect the leads.

Continuity Function-quickly checks the continuity of wires or traces.

True RMS Operation-gives a more accurate reading for non-sine wave AC
measurements.

Effective Overload and Transient Protection-covers all ranges expect the
DC/AC 10A range.

Full Auto-Polarity Operation-protects your meter and gives valid
measurements when you connect the leads in reverse polarity.

Frequency Counter-measures frequencies up to 2 MHz.

Diode-Check Function-safely checks semiconductors for open, shorted, or
normal junctions.

Low-Battery Indication-shows you when battery power is low by displaying
a low-battery indicator.

Folding Wire Stand-lets you use the meter on a bench top.

UL Listed-passes the stringent tests required by Underwriters Laboratories
for safety.

Built-In Temperature Function-measure temperatures from -58øF to 302øF
(-50øC to 150øC) and gives the readings in Fahrenheit (F) or Celsius (C).

(RLR-11/15/93)