Model 99  (160-0537)        Care and Maintenance       Faxback Doc. # 7935

Your Optimus Model 99 VHS VCR is an example of superior design and
craftsmanship.  The following suggestions will help you care for the VCR
so you can enjoy it for years.

    Keep the VCR dry.  If it gets wet, wipe it dry immediately.  Liquids
    can contain minerals that corrode the electronic circuits.

    Handle the VCR gently and carefully.  Dropping it can damage its
    circuit boards and cases and cause it to work improperly.

    Use and store the VCR only in normal temperature environments.
    Temperature extremes can shorten the life of electronic devices, and
    distort or melt plastic parts.

    Keep the VCR away from dust and dirt, which can cause premature wear
    of parts.

    Wipe the VCR's front panel and other exterior surfaces with a clean,
    soft, dry cloth.  Do not use harsh chemicals, cleaning solvents, or
    strong detergents to clean the VCR.

Modifying or tampering with your VCR's internal components can cause a
malfunction and might invalidate the VCR's warranty and void your FCC
authorization to operate it.  If your VCR is not operating properly, take
it to your local Radio Shack store for assistance.

Servicing Your VCR

There are no user-serviceable parts inside your VCR.  If you encounter a
problem that you cannot correct using this manual and its troubleshooting
guide, take the VCR to your local Radio Shack store for assistance.

Cleaning the Video Heads

Dirty video heads can cause the playback picture to become blurred even
though the audio signal is clear.  Serious problems require cleaning by a
trained technician.  For more head cleaning information, contact your
local Radio Shack store.

Storing Your Video Cassettes

Unless you are making an automatic timer recording, eject and store the
cassette before you turn off the VCR.  This helps protect the cassette and
the VCR's internal mechanisms from dust.

Place your video cassettes in their protective boxes and store them in a
cool, dry, dust-free environment.  Store the cassettes on end, not on
their sides.  This prevents improper settling of the cassette's spools.

NOTE:  Tape can become would too tightly around the cassette's spools
       after numerous playings.  This can cause the cassette to improperly
       load and automatically eject when you insert it.  On most cassettes
       there is a brake-release plunger on the bottom center of the
       cassette.  Use the tip of a pen or pencil to press the plunger. 
       This loosens the tape.

Clean heads only when picture quality is affected.

(ALL-11/11/94)