Home Alarm System  (275-0484)      Procedures           Faxback Doc. # 6810

I.  Visual - Mechanical Inspection

    A.  Ensure that the following items are checked:

        1.  Tamper switch is in tact and mounted in upper left hand corner
            of bell box.

        2.  Battery is connected properly, red lead to positive terminal-
            black lead to negative terminal.  (Battery 23-007 or
            equivalent)

        3.  Leads are connected to back terminals of the keylock.

        4.  Bell dome is in place and secure.

        5.  White twisted pair of wire, marked "Burglary", are present
            and twisted stripped ends together.

        6.  Black leads (2) marked "Inside Toggle Switch" are present,
            and not twisted together.

II.  Electrical Test

        A.  With bell box open, turn keylock to the "ON" position.  Bell
            should sound.  Turn keylock to the "OFF" position.

        B.  Close bell box and secure lid with one screw.  Turn keylock to
            "ON" position.  Bell should not sound.  Turn keylock to the
            "OFF" position.

        C.  Reopen bell box and connect toggle switch to black leads
            marked "Inside Toggle Switch".  (Ensure leads are routed
            through knockout in bell box so bell box can be closed and
            toggle switch is in the "OFF" position.)

        D.  Untwist white twisted pair marked "Burglary".  (Ensure that
            the ends are kept separated.)  Reclose and secure box with
            one screw.

        E.  Flip toggle switch to the "ON" position.  Bell should sound.
            Flip toggle switch to the "OFF" position.  Bell should shut
            off.

        F.  Test is complete, disconnect battery and toggle switch.


(LB/all-07/1/94)