Four-In-One Remote Control  (150-1909)   Problems      Faxback Doc. # 6723

IF YOU HAVE PROBLEMS

If the 4-in-1 does not control your remote control devices when you first
set it up, you probably haven't entered the correct 3-digit code for your
devices.  You can try all the codes for the brand of your device, but
because many manufacturers make products using several different brand
names, you might want to search the 4-in-1's entire library as follows:

1.  Manually turn on the device you are trying to set up.

2.  Aim the 4-in-1 at the device.

3.  Press down and hold the P until the red indicator blinks twice.

4.  While holding down P, repeatedly press POWER, then the device key for
    the type of device (TV, VCR, AUX, or CBL) until the device responds.

    Each time you press the device key, the 4-in-1 advances to the next
    manufacturer's code in the list.

5.  When the device responds, release P to lock in the manufacturer's
    code.

If necessary, repeat these steps for each device key.

To determine which 3-digit code the 4-in-1 is set to, press down and hold
P until the red indicator blinks twice.  While holding down P, press the
device key (TV, VCR, AUX, or CBL) followed by 1.  The 4-in-1 blinks out
the number of the first digit.  While continuing to hold down P, press 2
to have the 4-in-1 blink out the second digit, then 3 to have it blink out
the third digit.

If the 4-in-1 stops working after you successfully test the control of
each device, or if you are unable to get the 4-in-1 to work at all, check
the following:

*  Be sure you press the device key for the device you want to control.

*  Replace the batteries.

*  Confirm that your remote control devices are working properly using
   manual controls or the original remotes.

*  If some buttons do not function for your device, you might be able to
   scan to a better device code.

If you are still unable to determine the problem, call our nationwide
Universal Remote Control Hotline at 1-800-989-5000.

(br/all-6/29/94)