LCD Auto Range Multimeter (220-0163)  Specifications   Faxback Doc. # 6288

Display:.................................................3 3/4 Digit, LCD
DC Volts:
400 mV/4 V/40 V/400 V/1000 V.......+/-0.8% of reading and +/-0.2% of full
                                                scale  +/-1 in last digit

AC Volts:
4 V/40 V/400 V/750 V at 50 to 60 Hz:.....................+/-1% of reading
                                +/-0.5% of full scale, +/-3 in last digit
400 mV at 40 Hz to 100 Hz:.............................+/-1.5% of reading
                                +/-0.5% of full scale, +/-3 in last digit
40 V at 45 Hz to 500 Hz:....................+/-1.5% of reading +/-0.5% of
                                           full scale, +/-3 in last digit
40 V at 500 Hz to 10 KHz:........+/-6.0% of reading +/-0.5% of full scale
                                                       +/-3 in last digit

DC Current:
40 mA/400 mA/4 A/10 A:...........+/-1.5% of reading +/-0.2% of full scale
                                                       +/-2 in last digit

AC Current:
40 mA/400 mA/4 A/10 A at 50/60 Hz:.....................+/-1.5% of reading
                                +/-0.5% of full scale, +/-3 in last digit

Resistance:
400 ohms/4 Kohms/40 Kohms/400 Kohms/4Mohms:............+/-1.5% of reading
                                +/-0.2% of full scale, +/-1 in last digit
40 Mohms +:...3% of reading and +/-0.2% of full scale, +/-1 in last digit
Continuity Function:........Continuity buzzer sounds at less than nominal
                                                  50ohms input resistance
Input Impedance:...10 Mohms (DCV/ACV. More than 100 Mohms on 400 mV DC/AC
                                                                    scale
Range Control:.........................Auto range or manual range control
                                selectable by AUTO or RANGE SELECT button
Polarity:..............................................Automatic polarity
Overrange Indication:..OL with intermittent buzzer tone (if buzzer is on)
Over Maximum Value Indication:....... When the measured value exceeds the
                               maximum value of Volts or Amperes function
                            on the highest range, the value or OL blinks,
                          with intermittent buzzer tone (if buzzer is on)
Low Battery Indication:.............BATT on the left of display indicates
                         when the battery voltage is below 2.3V (nominal)

Power Source:..................................Two AA size 1.5V batteries
Power Consumption:...........................................10mW typical
Operating Temperature:........................32 degrees to 122 degrees F
                                              (0 degrees to 50 degrees C)
Storage Temperature:..........................-4 degrees to 140 degrees F
                                             (-2 degrees to 60 degrees C)
Weight:....................................................7.4 oz (210 g)
Size:..............................6 1/16 x 2 11/16 x 1 9/16 Inches (HWD)
                                                       (155 x 70 x 32 mm)
Accessories:..............................2 fuses (0.5A/250V); Test Leads

(CJD/all-7/14/94)