Talking Vehicle Alarm  (490-0730)    Specifications     Faxback Doc. # 6129

Control Module With Self Contained Siren

Sound Level.....................................more than 120 db at 1 meter

Current Drain (Standby)...............................................22 mA

Current Drain (Siren or Talking).....................................1000mA

Power Requirements.................................................12V D.C.

Power Requirements (Emergency Back-up)......................9 volt alkaline

Fuse.......................................................10 amp tube type

Weight...............................................................15 lbs

Remote Transmitters

Carrier Frequency...............................................303.875 MHz

RF Power Output.........................5,580 micro volts per meter or less

Power Requirements........................one 12 volt alkaline battery each

Weight..............................................................1.5 oz.

INFORMATION

Your alarm system might cause TV or radio interference even when it is
operating properly.  To determine whether your system is causing the
interference, turn off your alarm system.  If the interference goes away,
your alarm system is causing the interference.  Try to eliminate the
interference by:

*  Moving your alarm system away from the receiver.

*  Contacting your local Radio Shack store for help.

If you cannot eliminate the interference, the FCC requires that you stop
using your alarm system.

(RLR/jlc-03/22/94)