Mouse Controller Calendar (250-1010)  Jumper Settings  Faxback Doc. # 5296

Uses DIGI Mouse (26-1197) ONLY, not a serial mouse port.

The 25-1010 board uses the same interrupt request line
as a COM 2 serial device (IRQ#3).
The 25-1010 board uses the same address area as a COM 2 serial device.
(PORT 2FC Hex)

Low Battery Error is common!

Bend the contacts closer together.  Clean the battery & contacts. As a last
resort, slide a penny between the battery & top contact. The replacement
battery may be ordered at your local Radio Shack under part number: ACS-0103
(National Parts).

Check mouse driver date when COM 1 device is affected by installation of
the DIGI Mouse board.  Correct version of MOUSE.SYS driver May 1985 or later.

* Do NOT use in the Tandy 3000/4000 series.

(DTC/jlc-03/28/94)