Power Switching Center  (260-0363)     Installation    Faxback Doc. # 5176

You can install the Power Switching Center between your computer and
monitor for easy access, use it as a base for the monitor or place it near
your computer system.

Cautions:  Use only with a three-prong standard AC outlet or a grounded
           two-to-three prong adapter.  The center cannot provide
           protection without a grounded AC source.

           The equipment you plug into the Power Switching Center must
           have the same voltage and frequency ratings as specified in
           "Specifications."

           Check the wattage ratings of all components you are attaching
           to the Power Switching Center and make sure that total wattage
           does not exceed the Power Switching Center's 1,875 watt power
           rating.

Follow these steps to set up the Power Switching Center.

1.  Place the center on a study, level surface.

2.  Plug your computer system's (computer, monitor, printer, and two
    auxiliary components) AC cords into the corresponding outlets on the
    back of the center.

    Caution:  Do not exceed the rated capacity of each outlet.

3.  Plug the center's AC cord into a standard AC outlet.

CONNECTING THE PHONE LINE

Follow these steps to connect the center to the phone line:

1.  Plug one end of the supplied telephone cord into the center's OUT
    jack.  Then plug the other end into a modular telephone jack.

2.  Plug a fax machine, modem, or telephone into the center's IN jack.

(Br/all-9/21/94)