DMP 2100  (260-1256)           Self-Test               Faxback Doc. # 4605

The DMP-2100 has a built-in self-test feature which lets you check printing 
quality and general printer operation before you connect the Printer to a 
computer. This is a good time to check that the Print Head is properly 
adjusted (printing is neither too faint nor smudging occurs) and if the 
paper is feeding properly.

The Self-Test includes the various printer font styles, print widths and 
intensities, underline, graphics characters, and even a dot graphics sample. 
Before running Self-Test, be sure to load wide paper into the Printer.

To run the Self-Test:

1. Plug the Printer into an AC power outlet.

2. Set the Power ON/OFF Switch to ON.

3. Set the ON/OFF LINE Switch to OFF-LINE.

4. Press the TEST Switch.

The printer will begin printing almost all the characters that it's capable of 
printing.

5. The Self-Test printing will stop when the:

* Self-Test has been completed. (58 lines)

* Printer cover has been opened.

* RESTART Switch has been pressed.

* Out of paper condition has been detected.


(smm 07/26/93)