DWP 410  (260-1250)       Ribbon Cartridge             Faxback Doc. # 4377

Black Nylon (26-1449)
Multi-Strike 3-Pak (26-1419)

RIBBON CARTRIDGE INSTALLATION/REMOVAL

Radio Shack provides two ribbons cartridges for the DWP-410 -- a high-qual-
ity Carbon Ribbon (260-1419) and a long life nylon ribbon (260-1449). No 
matter which ribbon you choose, you'll find that they're both easy to 
install or remove.

TO INSTALL A RIBBON CARTRIDGE:
1. Before installing the Cartridge, remove all slack in the ribbon by turn-
   ing the green knob on the Cartridge in the direction indicated by the 
   arrow (clockwise).
2. Position the Cartridge so that the Ribbon slides into position between 
   the Print Wheel and the plastic Card Guide and the tabs on the Cartridge 
   are lined up with the green clips on the Carriage.
3. Press down on the Cartridge and snap it into place.
4. Turn the Ribbon Feed Gear 1/4 to 1/2 turn clockwise until the Cartridge
   clicks down.

TO REMOVE A RIBBON CARTRIDGE:
1. Gently press the Carriage "claws" away from the Cartridge tabs.
2. Lift up on the Cartridge. Be careful not to catch the ribbon on the Print
   Wheel.

(css 07/27/93)