JP 250 (26-2873)            HEX Dump Feature           Faxback Doc. # 4142


This feature lets you print the hexadecimal information the computer sends
to the printer. You can use this feature as a diagnostic tool when you have
problems with the computer or the software.

Follow these steps to use the hex dump feature.

1. Turn the power switch on while pressing the LF/FF and PITCH switches at
   the same time and hold both switches (for about three seconds) until the
   buzzer sounds.

2. Send data to the print.

3. To end the hexadecimal dump function, turn the power switch off.

Note: Dump codes can be printed only when the print buffer is full. Any 
      data remaining in the buffer will be printed automatically if addit-
      ional information is not received within five seconds, or when the 
      printer is switched to offline.


(jej 04/26/94)