MMS-20  (250-1109)               Operation             Faxback Doc. # 3304

TURNING THE MMS-20 ON AND OFF

To turn on the MMS-20, press POWER.  The POWER indicator lights.  Press
POWER again to turn off the MMS-20.

SELECTING THE SPEAKERS

Set SPEAKER (on the back of the MMS-20) as follows:

INTERNAL  - Activates the MMS-20's built-in tweeters and woofer.

EXTERNAL  - Activates the external speakers only.

CONTROLLING THE SOUND

After you select the speaker(s), adjust the following controls to suit
your listening preferences:

   VOLUME - Turn to set the volume to a comfortable listening level.

WARNING:  To prevent possible ear injury and hearing loss, do not listen
          at high volume levels.

  BALANCE - Turn to adjust the balance between the left and right external
            speakers.

    MIXER - Turn to adjust the balance between the primary and auxiliary
            sound sources (INPUT A and INPUT B).

EQUALIZER - Slide the five levers (100 Hz, 340 Hz, 1 kHz, 3.4 kHz, and 10
            kHz) up to increase or down to decrease the level of sound
            around the frequency range listed.  At the center position,
            the sound will not be affected.

Notes:  The leftmost lever (100 Hz) affects the lowest bass frequencies,
        while the rightmost lever (10 kHz) affects the highest treble
        frequencies.

        If sound becomes distorted when the equalizer is set at the
        maximum level, set the MMS-20's equalizer at a lower level, or use
        your computer's hardware or software to lower the volume.

(br/all-11/3/94)