3200  (250-1633)           Stopping the DEMO           Faxback Doc. # 3261

You may receive a call on not being able to stop the Demo on the 3200.
There are two ways to run the Demo.  One is from Winmate (INSIDE) and the
other is from Program Manager (Radio Shack Demo Setup).  By default, if
ran from Winmate the Demo will run through once.  It can be altered and
set to run continuously by editing the file: 

C:\Winmate\demo\demo.spt

Change the line under (EXIT) from CMD=END to CMD=START.  By default, there
is nothing under (END).  If the file has been altered to run the Demo
continuously it can be stopped by (CTRL) (ALT) (ESC) and using the Task
List.  You will not be able to exit Winmate or Program Manager until the
above file has been altered back to CMD=END.  You may do this from Windows
Notepad.

If ran from Program Manager (Radio Shack Demo Setup), by default, it will
run continuously.  To STOP the demo you MUST reset the system and press F5
after the memory count.  From the DOS prompt, edit the files:

System.ini
Win.ini
Mmscript.ini

These files are located in the Windows directory.

In the Win.ini file, change the lines under the [Windows] section, to:

run=WRAPPER.EXE
Programs=com exe bat pif
ScreenSaveActive=0
ScreenSaveTimeOut=120

In the System.ini file, change the line under the [boot] section to:

shell=desktop.exe
SCRNSAVE.EXE=(NONE)

Remove the line"taskman.exe=" from under the [boot] section.

In the Mmscript.ini file, remove:

[windows]
load=
run=WRAPPER.EXE
programs=com exe bat pif
ScreenSaveActive=0
ScreenSaveTimeOut=120
[Desktop]
Wallpaper=rs7,bmp
[boot]
SCRNSAVE.EXE=(None)
shell=desktop.exe

These files must be altered or the Demo will continue to run as soon as
Windows restarts.


(JH/jej-11/07/94)