MPC Audio Adapter  (250-1099)       Feature            Faxback Doc. # 2655

The audio adapter has the following features:

-Software-programmable digital/analog mixer.
-Stereo-digitized voice channel with 2 x 8-bit DAC
-FM music voices: 8 selectable waveforms and up to 15 melodies and 5
 percussion sounds.
-Programmable sampling rate
-8-bit stereo analog/digital conversion of sound signal.
-CDR-1100 CD-ROM drive interface, joystick port, and MIDI interface.
-Microphone jack and amplifier with Automatic Gain Control (AGC).
-Stereo Power Amplifier
-Master volume control.
-Direct and DMA DAC transfer modes.
-Software-selectable sound input: microphone input (mono), line input
 (mono or stereo), and CD audio input (mono or stereo).

PACKAGE CONTENTS

The audio adapter kit includes the following items:

-Audio adapter.
-Three audio cables (for connecting a CDR-1100, CDR-1000, or CDR-1501
 drive).
-Software (on CD and on diskette).
-Audio Y-cable.
-Documentation.
-NOTE:  You will only use one of the three audio cables provided.

SYSTEM REQUIREMENTS

To use the adapter, your system must meet or exceed the following
requirements:
-16 MHz 386 microprocessor.
-4MB of system memory.
-512KB of video memory.
-640 x 480 video resolution.
-256-color VGA mode support.
-Windows 3.1 installed.
-7MB of hard disk space available for installing the software for the
 CD-ROM drive and the audio adapter.

In addition, your system must have an open drive bay for a CD-ROM drive
and an open 16-bit expansion slot for the audio adapter.  The CD-ROM drive
is purchased separately.

The CDR-1100, CDR-1000, and CDR-1501 CD-ROM drives are recommended for use
with the audio adapter.  The adapter has a built-in interface for the
CDR-1100.  If you use a CDR-1000, a CDR-1501, or another CD-ROM drive, an
expansion slot is also required for the CD-ROM drive interface adapter.

NOTE:  The factory settings of the adapter's audio port, audio DMA, and
       audio interrupt jumpers are required for proper audio operation
       with Sound Blaster-compatible applications designed for use
       with MS-DOS.

(smc-11/18/93)