1500 HD (250-3506) Power_15 Utility Faxback Doc. # 1907 AUTOMATIC FLOPPY DISK STANDBY MODE ENABLE HARD DISK STANDBY MODE TIMEOUT 2 MINUTES 0 SECONDS DISPLAY TIMEOUT (MINUTES) 1 LOW POWER BEEPER ENABLE BEEPER ENABLE ESC TO QUIT F1 TO UPDATE Changing the Computer's Functions: The POWER PROGRAM lets you temporarily change the power-management parameters without restarting the computer. However, the changes made while using this program are not stored in memory, and when the computer is restarted, it returns to the parameters stored using the SETUP program. SETUP and POWER can run from DeskMate or MS-DOS. There is also a group of MS-DOS power- management LINE COMMANDS that temporarily change the power management para- meters without running SETUP of POWER. These commands can be used in batch files. This could be convenient if you often switch from AC power to battery power. One batch file can be made to set power-management parameters for AC- power operation. Running the Power Management Program: 1. Use the arrow keys to select the Power icon. Press . The Power program menu appears. 2. Use the arrow keys to select the parameter, then use the spacebar to the desired button. Notes: When Automatic Floppy Disk Standby, Hard Disk Timeout, Display Time- out, Low Power Tone, and Speaker are selected, X appears in the boxes. Type in the minutes and seconds to change the Display Timeout in the range 0-255 minutes. 3. When you have selected the desired parameters, press --the options menu appears. Use the arrow keys to select one of the following options: SAVE--Press to immediately activate the parameters selected. FACTORY SETTINGS--Press and respond to the confirmation dialogue box. EXIT/ESC--Press to exit the Power program and return to the previous parameters. If you selected changes on the power menu, an additional dialogue box appears to give you one more chance to accept or reject the changes. Power Management Parameters: The power management section can save battery power by automatically turning off hardware, such as the disk drives and the display, when the computer is not in use. The power management section allows you to: * Set the Hard Disk Timeout * Enable and disable the Automatic Floppy Disk Standby mode * Set the Display Timeout * Enable or disable the Low Power audio signal. You can change several of the computer's parameters by using the Power pro- gram in DOS within the DOS directory. The DOS program is POWER_15. To run the Power program, use the following steps: 1. Exit from DeskMate (or any other program). 2. If you are not in Drive C, type: c: 3. To change to the DOS directory, type: cd dos 4. At the prompt, type: power_15 The Power program screen appears. Use the up and down arrows to select the parameter you want to change. Then, press the left and right arrows to select the setting for the parameter. 5. Press to save your changes. If you do not want to save changes, press . Using Power Management Line Commands: You can also use command lines to set the options, without entering the menu mode. The command-line mode is useful if you want to include options in batch files. Floppy Disk Standby Command Lines: power15 /fdstandby Displays the current status of the Automatic Floppy Disk Standby mode. Beeper Command Lines: power15 /beeper Displays the speaker status power15 /beeper:enable Enables the speaker power15 /beeper:disable Disables the speaker You can turn off the speaker so that no sounds come from the computer while the power is turned on. Low Power Indicator Command Lines: power15 /1pbeep Displays the Low Power Beeper status power15 /1pbeep:enable Enables the Low Power Beeper and displays a status message power15 /1pbeep:disable Disables the Low Power Beeper and displays a status message To receive a low battery tone, you can turn on the Low Power Indicator to tell your when the battery is low, in case you do not notice the battery indicator. Display Timeout Command Lines: power15 /lcdtime--displays the Display Timeout value power15 /lcdtime:xxx--sets the display to turn off after not using the keyboard for 1-255 minutes and displays a message indicating the new timeout value. Entering zero will not allow the display to turn off. power15 /lcdtime:never--sets the display to remain on all the time. If you need to leave the computer turned on and unattended, you can set the Display Timeout parameter to turn off the display after a specified time period. This option can help save battery power. HARD DISK TIMEOUT COMMAND-LINES power15 /hdstandby--displays the Hard Disk Standby Timeout value. power15 /hdstandby:mm:ss--This command sets the Hard Disk Standby Timeout value and displays a message indicating the new timeout value. mm.ss indicates the minutes and seconds format. Five second intervals in the range 00:15-18:20 must be used for SS. power15 /hdstandby:never--This command will not allow the hard disk to enter the standby mode. You can increase battery power savings by using the Hard Disk Timeout command to turn off the hard disk after a few minutes of inactivity. POWER MANAGEMENT KEY COMBINATIONS There are also some key combinations, labeled in blue, that can help to save power as the computer is used. These key combinations override the Setup program and Power program parameters. FN+F4 (Disk) This key combination causes the hard disk controller to turn off until accessed. No special keystrokes or commands are needed to turn the disk controller on again. FN+F5 (Spkr) This key combination enables and disables the speaker. FN+F7 (Display) You can press this key combination to turn off the backlight and the LCD. Any normal keyboard entry you make will turn the backlight and the LCD back on. FN+F10 (Standby) This key combination puts the computer in a standby mode. The hard disk, LCD, backlight, and floppy disk controller are turned off until a normal keyboard entry is made. (smm 08/24/93)