TANDY 1000 RLX  (250-1452/53)    Floppy Drive Install   Faxback Doc. # 1327

To add an additional drive, you will need a 1.44 MB (25-4053) or a 720 KB
(25-1075) diskette drive kit, which you can purchase at your Radio Shack
Store, and a Phillips screwdriver. Be sure to read the instructions that 
come with the new floppy disk drive before beginning.

To install the drive:

1. To remove the plastic insert from the front cover, press the insert outwards, 
   away from the cover.
2. You will fasten the diskette drive to the drive mount, so first unscrew the
   two front screws and remove the bracket that fastens the drive mount to the
   chassis.
3. Remove the drive mount.
4. Turn the drive mount over and you'll find the three holes labeled "DD."
5. The drive kit contains the screws you will use to attach the drive to the
   mount.
6. Align the holes on the diskette drive with the corresponding holes labeled
   "DD" on the drive mount.
7. Use the screws provided with the kit to fasten the drive to the drive
   mount.
8. Fasten the drive mount to the chassis.
9. Attach the extra drive connector on the drive cable to the secondary
   diskette drive (Drive B).

Note: Refer to Faxback Doc. # 1324 for running the SETUPRLX Utility.

Run the RLXSetup program so that your system will recognize the new drive.