Fujitsu M2617T/M2618T:Switch Setting




PCA layout    All configurations marked "*" are default settings


Switch Settings(S/N:00001 to 30000)


Key SW1
 Alternation of IRQ 14/reserved
    Key 1    Key 4    Key 5
     OFF(*)   ON       OFF      Pin 29=IRQ 14, Pin 31=Reserved
     OFF(*)   OFF(*)   ON(*)    Pin 29=Reserved, Pin 31=IRQ 14
 Slave present(SLV)/active mode(ACT)
    Key 2    Key 3
     OFF      ON       Slave present mode
     ON(*)    OFF(*)   Active mode
Key SW2
 Master drive/Slave drive
    Key 1
     ON       Slave drive
     OFF(*)   Master drive


Switch settings(S/N:30001 or larger)


Key SW1
Alternation of IRQ 14/reserved
    Key 1    Key 2    Key 5
     OFF      ON       OFF      Pin 29=IRQ 14, Pin 31=Reserved
     ON(*)    OFF(*)   OFF(*)   Pin 29=Reserved, Pin 31=IRQ 14


Slave present(SLV)/active mode(ACT)
    Key 3    Key 4
     ON       OFF      Slave present mode
     OFF(*)   ON       Active mode


Key SW2
Master drive/Slave drive
    Key 1
     ON       Slave drive
     OFF(*)   Master drive


Daisy chain connection


To a drive which does not meet ATA standard proposal, the M2617/8T can be
connected as the master, the slave drive works under the following conditions:

Master: M2617T/M2618T
Slave: M2611/2/3/4/6 or M2622/3/4



Master drive


Slave driveM2617T/18T


M2611/2/3/4/6Slave present mode


M2622/3/4Active mode






to the table of contents!!