Revised: 19/9/1991@23:24EST

Number of disks 		8
Number of read/write heads 	15
Number of servo heads 		1
Number of cylinders             1633
Data Transfer rate		1.875 Mb/sec
Access time (ms)		4 (min) 16 (av) 40 (max)
rotational speed 		3600 Rpm.
Avg latency (ms)		8.33
Recording Mode 			RLL

Switch Settings:
_______________________________________________________
|                                                      |
|PWR                                                   |
                                                       |
|     ____ \                                           |
|     ____  \                                          |
|J1   ____   | 3 x dip switches                        |
|     ____   | Terminator on/off                       |
      ____   | On on LAST drive Off on rest            |
|     ____  /                                          |
|          /   | || |                                  |
|J2            |A||B| 2x Dip -See below A and B        |
|              | || |                                  |
 ------------------------------------------------------

   A                                B
_________			__________
|       |-M                     |        |-0\
|       |-A                     |        |-1
|       |-B                     |        |-2
|       |-S                     |        |-3  scnt-2 bits
|       |-P                     |        |-4
|   1   |-\                     |        |-5
|   2   |-  Drive Address       |        |-6/
|   3   |-/ (Binary Count)      |        |-C
---------                       ----------
1       0                       1        0

P= Write Protect
S= Sets Drive Hard sector mode and outputs -sector signal.
B= Mode B Reserved function. Set to 0
A= Sets Address mark found mode and outputs -address mark sig.
#Note only one of A, S, or B Modes should be set on (1) at any time.
M= Enables STRT Spindle motor start command function of ESDI buss.
C= Accept a Set Byte Per Sector command from the controller.
SCNT-2 bits 0-6 specify sectors/track when drive is in hard sector mode as
per table below.

                SCNT-2 Bits
Sectors/track   6 5 4 3 2 1 0           Bytes/sector
-------------   -------------           ------------
     14		0 0 0 1 1 1 0		2232
     26		0 0 1 1 0 1 0		1201
     27		0 0 1 1 0 1 1		1157
     28		0 0 1 1 1 0 0		1116
     52		0 1 1 0 1 0 0 		600
     53		0 1 1 0 1 0 1		589
     54		0 1 1 0 1 1 0		578
     94		1 0 1 1 1 1 0		332
     95		1 0 1 1 1 1 1		328
     96		1 1 0 0 0 0 0		325

===
File ends here. If you have any alterations or additions please email
lae@mullauna.cs.mu.OZ.AU.
===